Sunday, June 29, 2025

Silicade Measurements for making 2 and 4 gallons

 For making 2 gallons of Silicade 

Link to the recipe is at the end.  

1. Add 3 level dashes of sodium silicate to a one-cup Pyrex container 

2. Add 1/4 cup of tap water to the one-cup Pyrex measuring container 

3. Heat the contents of the Pyrex measuring cup to boiling and boil for at least 30 seconds 

4. Dilute immediately with a small amount of unheated tap water 

5. Pour all the contents of the Pyrex measuring cup into a 2 gallon container 

6. Fill the 2 gallon container with unheated tap water to the 2 gallon mark on the container 

7. Add 2 level dashes of sodium bisulfate to the 2 gallon container 

8. Stir the mixture thoroughly and then filter the mixture through a Brita filter pitcher 

9. After filtering, add 1 level dash of baking soda (sodium bicarbonate) to the mixture (adjust the pH according to the recipe) 

10. Stir Silicade to dissolve the baking soda


For making 4 gallons of Silicade 

1. Add 6 level dashes of sodium silicate to a one-cup Pyrex container 

2. Add 1/2 cup of tap water to the one-cup Pyrex measuring container 

3. Heat the contents of the Pyrex measuring cup to boiling and boil for at least 30 seconds 

4. Dilute immediately with a small amount of unheated tap water 

5. Pour all the contents of the Pyrex measuring cup into a 4 gallon container 

6. Fill the 4 gallon container with unheated tap water to the 4 gallon mark on the container 

7. Add 4 level dashes of sodium bisulfate to the 4 gallon container

8. Stir the mixture thoroughly and then filter the mixture through a Brita filter pitcher 

9. After filtering, add 2 level dashes of baking soda (sodium bicarbonate) to the mixture (adjust the pH according to the recipe). 

10. Stir Silicade to dissolve the baking soda

Here is a link to the Recipe: Silicade recipe

No comments:

Post a Comment